
( Brand: L-com ), ( Manufacturer Part Number: IEEE-488 ), ( Part Type: Cable Meter )
The L-COM IEEE-488 CMB GPIB Cable is a high-performance, versatile data communication solution designed for use in automated test equipment (ATE) applications. This cable is engineered to conform to the IEEE-488.2 standard, also known as General Purpose Interface Bus (GPIB), which enables the transfer of data, control signals, and power between instruments and computers.
The L-COM IEEE-488 CMB GPIB Cable is constructed with a centerbus configuration, ensuring optimal signal integrity and reliability. This design features a copper bus conductor surrounded by a shield, which is further protected by an insulating layer and an outer jacket. The shield provides an effective barrier against electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring accurate and consistent data transfer.
The cable is composed of 18 individual wires, including power and control signals, and eight data lines. Each wire is individually shielded for enhanced protection against noise and interference. The 17.74 mm (0.70 inch) overall diameter of the cable is suitable for use in a wide range of applications, and the flexible, low-smoke, zero-halogen (LSZH) jacket material ensures a long service life and improved safety.
The L-COM IEEE-488 CMB GPIB Cable is available in various lengths ranging from 0.5 meters (1.64 feet) to 30 meters (98.43 feet) to accommodate different test setups and configurations. The cable's termination options include both DB-15 (male) and DB-17 (female) connectors, allowing seamless integration with a wide range of test instruments and computers.
The L-COM IEEE-488 CMB GPIB Cable is backed by L-COM's commitment to quality and customer satisfaction. This cable is designed and manufactured to meet the highest industry standards, ensuring dependable and consistent performance for even the most demanding test applications. Additionally, L-COM offers a comprehensive warranty and lifetime technical support to help ensure that your test setup remains efficient and reliable.
L-COM IEEE-488 CMB GPIB cables are commonly used for data transfer and measurement applications in various industries. Here are some pros and cons of buying an L-COM IEEE-488 CMB GPIB cable meter:
Pros:1. High Data Transfer Rate: L-COM IEEE-488 CMB GPIB cables support high data transfer rates, making them ideal for applications that require fast data acquisition and processing.
2. Long Cable Length: These cables can be purchased in lengths up to 50 feet, making them suitable for use in large laboratories or industrial environments where instruments are located at a distance from each other.
3. EMC Shielding: The CMB (Common Mode Balance) shielding provides excellent electromagnetic interference (EMI) and radio frequency interference (RFI) protection, ensuring accurate data transfer and measurement.
4. Durable Construction: L-COM IEEE-488 CMB GPIB cables are built to withstand harsh environments, making them suitable for use in industrial applications where cables may be subjected to vibration, temperature extremes, or other environmental stresses.
Cons:1. Cost: L-COM IEEE-488 CMB GPIB cables are more expensive than standard GPIB cables due to their shielding and longer cable lengths.
2. Complex Installation: Installing and terminating L-COM IEEE-488 CMB GPIB cables can be more complex than traditional GPIB cables due to the shielding and termination requirements.
3. Limited Compatibility: These cables are designed for use with specific instruments and data acquisition systems that support IEEE-488 communication protocol.
Conclusion:L-COM IEEE-488 CMB GPIB cables offer several advantages over standard GPIB cables, including high data transfer rates, long cable lengths, EMC shielding, and durability. However, they come with some disadvantages, such as higher cost, complex installation, and limited compatibility.
Recommendation:If you require fast data transfer rates, long cable lengths, and EMC shielding for your measurement or data acquisition application, an L-COM IEEE-488 CMB GPIB cable may be the best choice for you. However, if your application does not require these features, a standard GPIB cable may be a more cost-effective option. Before making a purchase, be sure to check the compatibility of the cable with your specific instruments and data acquisition system.
Not really, I average 3-4 orders a day on here. I handle everything myself with my online store, from finding inventory, clean/prep/test/list, answering questions, packing orders, handling/solving issues, and all the paperwork at end of year, really don't have time to pack orders that will just Come back because thought this would work phone or didn't know was used, when clearly stated it.